Transmissions
Anti-Vibration Mounts
Cone Mounts
Cone with Cutouts
Quick Code: BB-357714
Type 30 Shore 50 Cone with Cutout Rubber Metal Anti Vibration Mount
The AMC cone mounts are safe and stable elements. They do not allow the suspended elements to tilt, whilst being flexible enough to avoid the transmission of noise and vibration through the support structure.
They are supplied complete with bump stop and centering washers. This renders deflection above the limits of the cones impossible, even at extreme loads.
The washers protect the natural rubber (which is highly elastic and highly resistant) from ozone and ageing, as well as from metal knocks and dripping oil. The characteristic deflection curves of the AMC-Mecanocaucho cone mounts with centering washer are quite linear, increasing progressively as the load increases. Thanks to this they can safely dampen overloads of up to three times the maximum admissible load.
The cutouts on the rubber section offer different horizontal/vertical stiffness ratios. This feature is especially interesting far those applications where a lower stiffness is required in one of the axes. Our technical department can provide you the elastical constants and can recommend you the optimal position of the cutouts.