Transmissions
Shaft Clamping Elements
RCK40 Shaft Clamping Elements
Quick Code: BB-158974
RCK40-70x110 Shaft Clamping Element
![RCK40-70x110 Shaft Clamping Element](https://thumbnails.bearingboys.co.uk/RCK40_Shaft_Clamping_Elements-cat-4339-cat.jpg)
![](https://thumbnails.bearingboys.co.uk/RCK40_Shaft_Clamping_Elements-cat-4339-cat.jpg)
Buy Now
Qty:
Product Specification
Axial Force
130kN
H
40mm
Inside Dia (d)
70mm
L1
24mm
Outside Dia (D)
110mm
Torque Capacity
4560Nm
Width (L)
28mm
X
25mm
Reference
RCK40-70x110
Quick Order Code
BB-158974
Product Description
RCK40-70x110 Shaft Clamping Element
These are the original type of shaft clamping elements, proven in a wide range of applications for more than 20 years. Suited to more general applications, this series provides medium torque transmission, which can be increased by mounting the unit in series. This type does not provide self centring, and therefore other methods of centring the hub to the shaft are required. The units do not move axially during clamping and generally self-release when clamping screws are relaxed.
Recommended tolerances for full torque transmission are:-
Shaft h9
Hub H9
If two or more elements are used in series the resultant torque will be proportionally increased. However the minimum hub dia. must be increased to accommodate the extra stress.
X = Distance required to remove screws, additional clearance for allen key may be required.
![](https://www.bearingboys.co.uk/uploads/RCK40 diagram.png)