Transmissions
Shaft Clamping Elements
RCK61 Shaft Clamping Elements
Quick Code: BB-159157
RCK61-16x32 Shaft Clamping Element
![RCK61-16x32 Shaft Clamping Element](https://thumbnails.bearingboys.co.uk/RCK61_Shaft_Clamping_Elements_-cat-4342-cat.jpg)
![](https://thumbnails.bearingboys.co.uk/RCK61_Shaft_Clamping_Elements_-cat-4342-cat.jpg)
Buy Now
Qty:
Product Specification
Axial Force
96kN
Inside Dia (d)
16mm
L1
17mm
Outside Dia (D)
32mm
Torque Capacity
77Nm
Width (L)
21mm
X
16mm
Reference
RCK61-16x32
Quick Order Code
BB-159157
Product Description
RCK61-16x32 Shaft Clamping Element
Available for shaft diameters from 10mm, these clamping elements are designed for small low torque applications, providing concentric connection of components to shafting. The thin wall design combined with low hub pressures enable use within small hub diameters. The design is intended that the units fit totally within the hub bore to provide safe surface. Some axial movement will occur when the units are clamped.
Recommended tolerances for full torque transmission are:-
Shaft h8
Hub H8
X = Distance required to remove screws, additional clearance for allen
key may be required.
![](https://www.bearingboys.co.uk/uploads/RCK61 diagram.png)