Bearings
Housed & Flanged Bearings
RHP Housed Bearings
RHP NP & MP Pillow Blocks
Quick Code: BB-134970
NP35HLT RHP 35mm Pillow Block Bearing (High/Low Temp Insert)
Buy Now
Qty:
Product Specification
Bolt Hole Centres (J)
121.5/136.5mm
Bore Size (d)
35mm
Brand
RHP
Height (H)
93mm
Housing Width (A)
44.4mm
Shaft Height (H2)
47.6mm
Total Length (L)
166mm
Reference
NP35HLT-RHP
Quick Order Code
BB-134970
Product Description
NP35HLT RHP 35mm Pillow Block Bearing (High/Low Temp Insert)
NP normal duty pillow/plummer block flanged bearing unit complete with high/low temperature bearing insert. The cast iron housing includes a grease nipple for re-lubrication. The bearing insert has two grub screws for tightening against the shaft once fitted.
These bearings can operated up to a maximum temperature of +180 deg C and down to a minimum temperature of -40 deg C. Re-greasing is essential for high/low temp inserts using Kluber Asonic HQ72-102 grease.
The inserts can be removed allowing you to replace with a new insert once required which can be ordered separately.
HLT inserts have: