Transmissions
Anti-Vibration Mounts
Ant Vibration Stud Mounts
Type A Bobbin Anti Vibration Mount
Quick Code: BB-357528
Bobbin Type A 130mmODx100mm Rubber Metal Anti Vibration Mount
![Bobbin Type A 130mmODx100mm Rubber Metal Anti Vibration Mount](https://thumbnails.bearingboys.co.uk/Bobbin_Type_A_130mmODx100mm_Rubber_Metal_Anti_Vibration_Mount-prod-357528-1.jpg)
![](https://thumbnails.bearingboys.co.uk/Bobbin_Type_A_130mmODx100mm_Rubber_Metal_Anti_Vibration_Mount-prod-357528-1.jpg)
![](https://thumbnails.bearingboys.co.uk/Bobbin_Type_A_130mmODx100mm_Rubber_Metal_Anti_Vibration_Mount-prod-357528-2.jpg)
The AMC bobbins are devices for making elastic anchorings or fixings. They can be used in a wide variety of applications, particularly for elastic suspensions and anti vibration isolation of machines and different mechanical organs. Type A bobbins are made of a block of rubber with two parallel metal parts at the end which enable it to be fixed with nuts. The rubber block may be cylindrical in cases requiring greater load capacity or as a diabolo when greater elasticity is required in all directions.
Depending on the size of the rubber block, the AMC bobbing has more or less elasticity, which is greater particularly in all directions perpendicular to its axis (shear). The bobbing thus makes it possible to make joins which permit major relative movements, up to several millimetres (in the case of heat expansion, chassis deformations, etc.). It serves very well for the vibration isolation of machines where the vibrations are perpendicular to their axis, unless these stresses are too much when applied in this direction.>
Applications
Suitable for installation on small motor-pumps, motor-ventilators, driers, sieves, compactors, washing machines, electrical motors, on-board control panels, measuring apparatuses, control cabinets, microphones, fluorescent tubes, etc.